Recent News

ProShop recently had an article that was published on the blog “ERP Focus”. The featured blog post focused on the 8 benefits of a digital manufacturing ecosystem. The blog explains how the most common systems employed in manufacturing are:

• Enterprise resource planning (ERP): software focused on integrating diverse computer systems to centralize information.

ProShop USA Supports Student-Run “Eagle Manufacturing” at
Brown County (IN.) High School With Donation of ProShop ERP Software

[Bellingham, WA – October 22nd, 2019] ProShop USA, provider of digital manufacturing
management systems, is donating ProShop ERP software to the student-run Eagle
Manufacturing business at Brown County High School in Nashville, IN.  

ProShop was recently mentioned in an article in Modern Machine Shop. The article highlights one of ProShop’s customers, East Branch Engineering and their journey into streamlining their shop floor with ProShop.

ProShop was mentioned in AMT News with the topic of “Building a learning organization”. The article starts out talking about how learning opportunities happen every day, from solving a persistent problem on a tricky job or figuring out a more effective way to perform a risk assessment of a new order.  

ProShop announced that it was named a FrontRunner for Manufacturing software by software advice. FrontRunner is designed to help small businesses evaluate which software may be right for them. The FrontRunners Quadrant uses reviews from real software users to highlight the top-rated Manufacturing software products in North America.  

ProShop ERP was mentioned in an article published on advancedmanufacturing.org which talked about boosting efficiency and shop quality. The article mentions how manufacturing companies strive to move jobs through the shop while maintaining top quality.  

ProShop USA provides Quality Management System Consulting Assistance to users of its ProShop Manufacturing Enterprise Software. To facilitate company compliance with quality management systems (QMS) organization and documentation requirements, ProShop USA, Inc., has started providing QMS consulting assistance to users of its ProShop manufacturing enterprise software.  

Smart manufacturing magazine has published an article which was written by Adion Systems co-founder and President of ProShop USA, Paul Van Metre. The article summarizes the importance of record keeping in the industry of medical devices.  

ProShop was recently featured in Manufacturing News for establishing its second location in Bellingham, WA. The article explains how ProShop USA is a subsidiary of Adion Systems, designed to facilitate sales and support of the ProShop software.  

ProShop was featured in the latest addition of Northwest Aerospace News Magazine. The article explains the history of ProShop, and how in the late 90’s Pro CNC was born. Pro CNC took an upfront approach to productivity and affordability, ultimately driving their business to be centered around its customers.  

ProShop was recently featured in Industrial Machinery Digest with ProShop’s “Frontrunner” ranking (ranked by software advice) highlighted. In the article, Paul Van Metre-Adion systems co-founder, mentions that “ProShop represents ERP 4.0 or perhaps a Digital Manufacturing Ecosystem.  

ProShop was highlighted in the publication “Manufacturing News” under the topic of Digital Manufacturing Ecosystems. The article mentions that ProShop’s goal at IMTS 2018 was to “debut a new generation of shop management software”.  

ProShop is featured in Canadian Metalworking for its dynamic ERP system. The article focuses on the idea that shops should have a clear goal in mind when looking around for an ERP.  

ProShop will be exhibiting at IMTS 2018 in the East Hall Booth 121645. We’ll be giving demos all day long every day and our senior training and implementation specialists will be there to answer every conceivable question you may have.  

ProShop has been taking the machine shop ERP world by storm since it’s introduction in 2016. We’re proud to have a high profile shop like CARR Machine and Tool ditch their legacy ERP system and adopt ProShop.  

For the second year in a row, ProShop will exhibit at the 2018 Aerospace, Defence & Security Expo in Abbotsford BC.  The exposition is August 9th and 10 at Tradex and is co-located with the Abbotsford International Airshow.  

ProShop announced today it was named a FrontRunner for Manufacturing software by Software Advice. FrontRunners is designed to help small businesses evaluate which software products may be right for them.  

For the second year in a row, ProShop will be exhibiting the I-90 Aerospace Corridor Conference and Expo. Last year was a big success so we just had to come back again.   

Adion Systems will be joining our New England reseller, Kairos Manufacturing Solutions at the Smart Manufacturing Experience 2018 in Boston, Massachusetts April 30 – May 2. We will be located in booth 1124.  

ProShop was recently awarded with “Best Value” and “Best Ease of Use” badges based on feedback from clients on the software review site Capterra. With over 500 categories and 325,000 software reviews, Capterra is recognized as one of the leading software review websites.  

ProShop founder Paul Van Metre will address the entire 600+ group of attendees at the 2018 PNAA Conference in Lynnwood, WA on February 13, 2018. PNAA’s Ignite-style sessions are intended to stimulate the delivery of new, exciting and tangible examples of applied innovation that assists SMEs in growing their competitive edge.  

ProShop will be exhibiting and co-founder Paul Van Metre will be speaking at the Advanced Manufacturing Expo in Branchburg NJ on October 18-19th.  The Expo and Open House is taking place at Cimquest and is the largest advanced manufacturing expo in the tri-state area.  

Every year for the last many years Modern Machine Shop Magazine publishes a Top Shops list based on an extensive survey of thousands of machine shops in the US.  It’s now turned into a conference which in 2017 is in Indianapolis on September 5-7th.  

ProShop will be attending the 2017 Aerospace, Defence & Security Expo in Abbotsford BC. The exposition is August 10 and 11 at Tradex and is co-located with the Abbotsford International Airshow.  

ProShop was featured along with a customer in the March 2017 issue of Modern Machine Shop. Sealth Aero Marine has been using ProShop for over 9 years and has seen tremendous improvements in efficiency, throughput and profitability with ProShop ERP.  

The latest episode of the popular Making Chips podcast was just released.  On this episode Adion Systems Co-Founder Paul Van Metre was interviewed and discussed how the company got it’s start in the manufacturing industry by starting a precision CNC machine shop, Pro CNC, right out of college in 1997.

After a highly successful debut where ProShop was Co-Exhibited in the Mastercam Booth at IMTS, ProShop has now been chosen as the exclusive 3rd Party Solution Provider in the Shop Management Software category!  

After meeting at the 2016 PNAA Conference in Lynwood WA in February, CNC Software Inc., the developers of Mastercam invited Adion Systems to co-exhibit ProShop in the Mastercam Booth and be part of a Partner Presentation every day.    

The founders of Adion Systems have formally launched ProShop at the PNAA(Pacific Northwest Aerospace Alliance) Conference near Seattle WA. After over 19 years in development and building a small but fanatical core of customers, Adion Systems has launched it’s website and first public appearance at the PNAA show.